Used Studebaker Transmission and Drivetrain Parts For Sale

BORG WARNER 4 SPEED T98 SHIFT FORK FORD I/H STUDEBAKER

Was in the inventory of a transmission shop I bought out. Do your own research with regards to fitment. See pics for condition

1957 Studebaker Hawk Standard Transmission Drive Shaft (1388)

NORS XT5078 Rear Wheel Inner Seals 1935 Studebaker Commander & President 180767

These were obtained from an old service garage and are not newly remanufactured parts.

WWII Studebaker US6 & US6X4 Bracket, Transfer Case Shift Shaft

Studebaker part # 666907. Don't miss this one. This is a very good Bracket, Transfer Case Shift Shaft for the following WWII Studebakers.

'53 STUDEBAKER CLUTCH CROSS SHAFT w/PIVOT/SWING ARM/CLEVIS and MOUNTING BRACKET

'53 STUDEBAKER CLUTCH CROSS SHAFT w/PIVOT/SWING ARM/CLEVIS and MOUNTING BRACKET.

1955 STUDEBAKER TRANSMISSION 878147

(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).

40 46 STUDEBAKER PICKUP T86-8 3 SPEED GEAR SET * USED * 32-25-19-14 * 193122

Flywheel/Flex Plate I-8 AT Fits 1949 PACKARD 535511

Pick up at our facilities is available. THAT BEING SAID, THEY WILL NOT BE IN PERFECT CONDITION AND WILL HAVE SIGNS OF WEAR AND RUST UNLESS OTHERWISE STATED. However the sensors and the torque converter are not covered under the warranty.

1948 STUDEBAKER TRUCK MANUAL TRANSMISSION 4X2 DRW 961789

6-CYL,MT,4X2,DRW,TRUCK NOT CAR. (i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).

1960 - 1966 STUDEBAKER STEERING COLUMN TRUCK LARK HAWK WAGONAIR COMMANDER ? NICE

ORIGINAL 1960 -1966 STUDEBAKER STEERING COLUMN. column is about 32 " LONG AND WILL LOTS OF OTHER CARS AND TRUCK. Eagle SBC 350 383 400 CRS6000B3D 6.000" ESP Connecting 4340 Forged Steel H-Beam. SOLD AS IS.

CORE AUTOMATIC TRANSMISSION FITS 1955 PACKARD 1029026

(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).

1959-1960 Studebaker Car & 1960-1962 T-Cab Pedal Shaft 1547147

Studebaker part #1547147. Don't miss this one. 1960-1962 Studebaker T-cab. 1959-1960 Studebaker cars (except C models). This is a very good Pedal Shaft for the following Studebakers.

1951-1957 Studebaker Driveshaft Center support Assy

Includes: 532009 Support, 664443 Bearing, 2 ea 531016 Dust Shield, 530421 Dust shield outer. Parts have been cleaned and painted.

1938 PACKARD 6 REAR AXLE ASSEMBLY 6-245 MT 1042165

245,MT,CHECK RATIO. Axles Assemblies: Axle assemblies will not include any brake hardware: Calipers/Rotors/Shoes/Pads/Hoses/Brake Lines. However the sensors and the torque converter are not covered under the warranty.

1952 PACKARD CORE AUTOMATIC TRANSMISSION INLINE 8 CYLINDER 816993

(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).

1960-1962 Studebaker T-Cab Rear Lower Shock Mount 1693170

This is a good to very good used Rear Lower Shock Mount for the 1960-1962 Studebaker T-Cab Champ Pickup. Studebaker part # 1693170. Don't miss this spare or upgrade. No Exceptions.

1956 PACKARD REAR AXLE ASSEMBLY 3.07 OPEN 758785

We are a family owned salvage yard founded in 1956. We have 66,000+ parts on inventory. Axles Assemblies: Axle assemblies will not include any brake hardware: Calipers/Rotors/Shoes/Pads/Hoses/Brake Lines.

1965 Studebaker Commander 3-07 Ring and Pinion Differential

Shows less than 60,000 miles, very good condition, includes everything in photos. It has the number 44 in casting and also number 58.

NOS 1948 1949 1950 1951 1952 1953 Chevrolet Car Truck Engine Main Cap 3688993

This has a GM part number of 3688993. This is in good condition and ready for installation. Do not miss out on this hard to find part for your classic car. 1948-53 Chevrolet all models w/o powerglide transmission.

233 V8 3-Speed Manual Bell Housing for 1954 Studebaker Commander

233 V8 3SPD MT BELL HOUSING 5-19-17. Used Late Model, Used Classic, New and Rebuilt. The warranty is void if any part(s) is used for any purpose not intended by the manufacturer. VIN specific computers.