Used Chevrolet K20 Manual Transmissions and Related Parts For Sale
PartRequest.com is your online source for quality used Chevrolet K20 manual transmissions and related parts.
The manual transmissions and related parts listed below fit a Chevrolet K20.
1967-1969 Chevy K5 K10 K20 Dana 44 Outer Axle Shaft Closed Knuckle 660118-1
Original pet from a GM front axle. Comes as pictured. No warranty.
For 1975-1986 Chevrolet K20 Auto Trans Torque Converter 37372MX 1983 1979 1976
1985 Chevrolet K20 4.3L V6 THM400 General Motors. 1980, 1985 Chevrolet K20 5.0L V8 THM400 General Motors. 1975-1976, 1978-1980 Chevrolet K20 4.1L 6 Cyl THM400 General Motors. 1977-1980 Chevrolet K20 6.6L V8 THM400 General Motors.
77-79 TRANSMISSION GM 400 Turbo Automatic TRANSMISSION 4x4 K10 K20 K30 TH400
OPTIONS:AT, 4x4, TH400. Fits: Chevy & GMC K10 K20 K30 years 1977 1978 and 1979 with above options^^. Up for grabs we have this 1977 Chevy K20 4x4 400 Turbo Automatic Transmission. Installation is extra!
1980-1988 GM Chevy K5 K10 K15 K20 10 Bolt 8.5 28 Spline Loaded Axle Carrier OEM
(Front Or Rear) 1980-1988 Blazer, Jimmy, Suburban, 1/2 And 3/4 Ton Trucks (K5, K10, K15, K20). (Front) 1988-1990 K10, K15, K20 Pickup 1/2 And 3/4 Ton Trucks. USED GM 10 Bolt 28 SPLINE LOADED CARRIER.
Spindle Large Bearing 706570X Chevy K5 K10 K20 GMC K15 K25 Dana 44 GM 10 Bolt
Dana Spicer P/N 706570X. OEM Dana Spicer Made In The USA Chevy GMC Dana 44 Or. GMC and Chevy Suburbans Jimmy and Blazers from 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 and 1991 with a solid Dana 44 or GM Corp. 10 Bolt front axle.
73-85 CHEVY TRUCK BELLHOUSING 6263756 250 292 6CYL 305 350 454 C10 BLAZER K20 79
You are looking at a 1973 to 85 Chevy truck clutch bellhousing. This aluminum bell is cast # 6263756 and is correct for 73 to 85 Chevy & GMC 10 to 30 series truck (2 & 4wd), Blazer and Suburban with Muncie 3 or New Process 4 speed, 6 cyl or V8 (even 454).
Genuine Spicer Dana 44 3.73 Ratio Ring And Pinion Standard Rotation 22736-5x
USED OEM Dana Spicer Dana 44 Ring And Pinion. Standard Dana 44 30 Spline 35-2033. Standard Cut Rotation. 11 Tooth Pinion gear # 32072. Pinion Splines 1.375" 26 Spline. Pinion Bearing Preload. 3.73 Ratio.
Chevy GMC Truck Pickup Dana 44 Differential Cover Plate K10 K20
This is a good heavy Dana 44 diff cover from a 76 Chevy k20. It measures 5/32 .156 thickness. It dose have some pitting on the inside below the fill hole. The outside was stripped of old paint and rust a painted with some black rust oleum.