1957 Chevrolet Carter WCFB Carburetor *Remanufactured

Carter Carburetor Part No: 2505S

Manufacturer: Carter Carburetor

Part Number: 2505S

Interchange Part Number: 2505SA, 2505SB, 6-1272

Fitment Type: Direct Replacement

Free Shipping*

Amazing

Customer Support**

Satisfaction Guaranteed

*Free Shipping for the Lower 48 States   **Amazing Customer Support Provided by the One and Only, DownDraftDan!

DESCRIPTION

• What Has Been Done to This Carburetor?

1. Disassembly

2. Ultra-Sonic Cleaning

3. Anti-Rust "Dichromate" Finish**

4. *New Accelerator Pump

5. *New Float

6. *New Airhorn Gasket

7. *New Main Body Gasket

8. *New Throttle Body Gasket

9. *New Cluster Gasket

10. *New Springs

11. *New "O" Rings

12. *New Seals

13. *New Check Ball(s)

14. New Bushings in Throttle Shaft

15. *New Flange Gasket

**Dichromate on Zinc Casting Only

*Ethanol Resistant Parts.

What Does Live Engine Testing Involve?

RPM Pre-Set: We want to Make Sure The Carburetor Curb idle is Pre-Set, Not to Low and Not to High, A Low Curb Idle Setting will Leave the Engine Running Rough Causing a Poor Running Engine, However a High Idle will Leave the Engine Racing Causing a Rich Running Condition.   We Can Promise You the Curb Idle will be Set for a Plug-N-Play Setup.

Fast Idle Pre-Set: I can't Emphasize this Enough, Fast Idle or Idle at Cold Start has to be One of the More Important Adjustments on the Carburetor.   Everyone Has Started an Engine in the Morning, Idle Goes High, then Drops Down into Normal Operating Temperature.   However if the Fast Idle is Not Set Properly then the Fast Idle will not Drop or will Take Longer to Drop.   When We Pre-Set this Adjustment on Carburetor We Make Sure the Choke is Opening the Choke Valve Normally and Make all the Necessary Adjustments on Our Live Engine to leave the Carburetor Ready to Go.

Mixture idle Screws Pre-Set: Fuel Economy, Fuel Economy, Fuel Economy, That is Why We Pre-Set this Adjustment.   We Always want to Set the Carburetor to Run Clean, a Clean Running Engine is always a Better and Efficient Engine.   Air/Fuel Ratio is Crucial to a Good Running Carburetor.   If you Order a Carburetor from Us, I can Guarantee You the Carburetor Will  Run Smooth, Clean, and Have the Power there When You Need it!

What is Your Shipping Charge?

Shipping is $24.99, However, Since We are Running a Promotion, Shipping is Free of Charge*.

How do I get My Core Deposit Back?

We Hold a Core Deposit Until the Old/Used Carburetor is Shipped Back.   Once the Old/Used Carburetor is Received We Will Issue a Refund Back to the Original Payment Method Used in the Purchase.   See Core Details!

How do I Order This Carburetor?

Three Words, "Buy it Now"  Questions or Concerns, Always Contact DownDraftDan!

About Us

Shipping

Core Return

Store Policy

FaQ's

About Us

Shipping

Core Return

Store Policy

FaQ's

      I t is very difficult to find a Carburetor Manufacturer that You Can Trust, More Less find a Good Carburetor Shop these Days.   The Art of Carburetors is Truly a Dying Business.   That is why I have made this website to keep the Carburetor Business Alive.   Our Carburetors are Completely Remanufactured to the brim,  Bushings in Throttle Shafts, Needle, Seat, Float, Choke Pull-Off, Rods, Springs, Check Balls, Accelerator Plunger, Accelerator Cup and Gaskets are New and Ethanol Resistant to Meet the Standard Fuel of Today.   Carburetors are My Business and I Plan to Keep it that Way for a Very Long Time (God Willing).   I am "Your Trusted Carburetor Specialist."

Questions or Concerns, Contact DownDraftDan!

Domestic Shipping: Free Shipping to All Lower 48 States.

- We Ship within 2-3 Business Days of Payment, if Not Sooner.

- UPS Ground Shipping takes Between 3-5 Business Days, if Not Sooner.

- We Use Either UPS or U.S. Post Office.

- Expedited Shipping Takes Between 2-3 Business Days

- Overnight Shipping Takes Between 1-2 Business Days (Ships within 12 hours of Payment)

- Questions or Concerns, Ask for DownDraftDan!

Cores are Very Important to Our Company;**in Fact it is the Foundation of Our Company.   Once the Photo has been Sent and we Find the Core is Satisfactory, We will Issue an RMA Number, that RMA Number Must be on the Box, Allow 1-2 Days for Core to be Issued via Original Payment Method.**

- Carburetors Cores Must be Packaged Neatly to Avoid Mail Carrier Damage, We Double Box Our Carburetors when We Ship them to You, Use the same Double Box along with all the Bubble Wrap and Packaging Peanuts.

- We do Provide a Pre-Paid Label via UPS to Return the Core, RMA Number is Required!

- Price on Listing May or May Not have a Core Deposit, Contact Dan for More Details.

Questions or Concerns, Please Contact DownDraftDan!

General Sales Policies

Warranty

Our Products are Guaranteed for 180 Days Against Defective Workmanship and Material.   We do have a Grace Period of 30 Days, Meaning if the Product is Defective for Whatever Reason for the First 30 Days We Will Cover Shipping to and from Your Location, For More Details, Ask for Dan.

If The Unit is Defective we will NOT be Responsible Beyond the Value of the Defective Unit, Nor will We in Any Way Be Responsible for Any Damages or Expenses Occasioned by Defective Merchandise.

We Will Only Guarantee the Replacement of the Unit as We Can NOT Guarantee Against Improper Installation and Use.

Return Policy

All Sales are Final, Returns Wil NOT be Accepted, Once You Purchase the Carburetor it Belongs to You!   However, We Will Warranty a Unit, If Something Does Happen to the Product You Can Return the Carburetor for Repair & Return (R&R) Call and Ask for Dan for More Details.

Prices

All Prices Subject to Change without Notice.   Core Values Will Decrease or Increase According to Market Value.  How Long Does it Take to Ship a Carburetor?

The Owners Do Not like the Idea that We Pull the Carburetors Off the Shelves and Send them to the Shipping Department.   They Want to Physically See the Carburetor Test and Run on Our Live Engine.  Once that Process is Done We Ship Out the Unit.  That Process Usually Takes 2-3 Days Many Times We Do get the Product Out Much Sooner.

2.  Does the Price Include a Core Deposit?  Do You Ship Internationally?

Japan, Germany, Finland, Europe and Many More are Some of Our Best Customers.  It is Always My Goal to Get These Carburetors to These Vehicles so a Piece of American History can Continue On.

4.  Are You an Actual Shop or Are You Rebuilding Them at a House?

We are an Acutal Shop/Facility/Building and All of the Above.  We Do this for a Living and Our Shop is 100% Carburetors, Why Last Night My Wife Woke Me Up, She Said "Wake Up! Wake Up!" I Woke up and Said, "What's Wrong?"  She Replied Saying, "You are Trying to Sell me a 1967 Pontiac Rochester Carburetor, and I Don't Want to Buy it..."  That is How Dedicated We are Here, Carburetors All Day Long and Carburetors Even in Our Dreams.

4.  Do You Have a Phone Number I Can Contact You At ?  We Understand That Many People that Buy Our Products are Not Computer Savvy.  I Hear it All the Time, Everytime I Pickup the Phone I Always have a Customers Saying, "Wow! a Live Person..."