1968 1968 BUICK SKYLARK & GS LEFT DRIVER'S FENDER 1969 ? nice!

Buick Part No: unknown

Manufacturer: Buick

Part Number: unknown

Here is the left fender from a '68 Skylark.   May also physically fit '69 Skylark, although (at the least) many of the trim moldings holes are different, and you'd need to modify those for a '69.   Is in very good condition for its age.   The only dents are a shallow 4-inch-long crease at the nose (see two closeup photos near the end of the series), plus a minor bend at the bottom front lip (see next-to-last photo), and both of those would be an easy fix.   This fender has no bondo or sign of prior repairs.   The only rust damage I can find in this fender, is a small hole at the bottom of the lower rear lip (I cleaned things up with a stiff wire brush to determine the extent of the damage.....see last photo).   That rust would be an easy fix and which wouldn't show anyway.   All bolt eyelets are intact.   The wheel lip molding, beltline molding, eyebrow molding, and the molding at the upper rear corner are included.   All but the one at the upper rear corner have dings, but could likely all be fixed.   This item is too large for UPS Ground (and Greyhound is no longer an option), and is available for pickup at my home in Sweet Home, Oregon (about 100 miles south of Portland).   Can also be shipped via truck freight, at a cost in the range of $450 to $520, depending on your location and whether you have a business address it can be shipped to (you can ask me for a quote).   And if you're on the west coast, I know a transporter who can deliver for about $300 (again, please ask for a quote).