Used Lancia Mouldings and Trim For Sale
PartRequest.com is your online source for quality used Lancia mouldings and trim.
The mouldings and trim listed below fit a Lancia.
Lancia Aurelia B24 S Under Door, Body Side Trim
One pair of used Lancia Aurelia B24 under door, side body trim. As you know, these parts are very rare. One piece appears to be, slightly bowed and flattened. Both pieces exhibit dents and scratches.
LANCIA APPIA Series 3 Used Original PAIR of ROCKER PANEL TRIM SPEARS to Repair
This is a Used Original PAIR of Rocker Panel SPEARS / MOLDINGS for LANCIA APPIA SEDAN Series 3 models. First few photos show these parts next to a S3 Appia Sedan for reference ONLY. At center there is round opening to access the jacking point on the car.
LANCIA APPIA Series 2 / 3 Re-Chromed ORIGINAL Rear Window CHROME TRIM MOLDING
Show quality job!Includes the small cover at joint connection, but due to plating it does not slip on, you may have to file edges slightly or open up the connector. Since it was replated about a decade ago, it was wrapped until now for the photos.
LANCIA APPIA Series 3 Used Original HOOD SPEAR with Brass "A" Logo APPIA SEDAN
This is a Used Original HOOD SPEAR MOLDING for the Hood of LANCIA APPIA SEDAN Series 3 models. It has the brass "A" logo at its front. One photo shows this spear on the hood of a S3 Appia for reference ONLY.
LANCIA APPIA Series 2 / 3 Re-Chromed ORIGINAL Front Windshield CHROME TRIM
LANCIA APPIA SEDAN Series 2 and 3 models, Front WINDSHIELD SURROUND TRIM MOLDING. Includes the small cover at joint connection, but due to plating it does not slip on, you may have to file edges slightly or open up the connector.
Lancia Beta 1973-1978 Rear Glass Corner Mouldings
Other models and years listed in my 'title line' are for search purposes only. I am not any kind of expert. I am not an expert, kindly do your own research and be knowledgeable for your particular application before buying.
LANCIA FLAMINIA PF 3B COUPE Used Original SET of ROOF REAR QUARTER MOLDINGS
This is a used Original SET of REAR QUARTER and ROOF TRIM MOLDINGS from a LANCIA FLAMINIA PF 3B 2.8 Liter COUPE model. They are as pictured. There is a ding on one that is pointed out. The cloisonne Lancia badges are present, but have wear.
LANCIA FLAMINIA PF SALOON Used Original Front WINDSHIELD SURROUND TRIM MOLDINGS
This is a used Original WINDSHIELD SURROUND TRIM MOLDING SETfrom a LANCIA FLAMINIA SALOON model. There are 4 sections that totally surround the windshield. It is as pictured. Overall good condition and appears straight.
LANCIA FLAMINIA PF 3B 2.8 Liter COUPE Used Original PAIR Door Jamb COVERS
This is a used Original PAIR of DOOR JAMB TRIM COVERS from a LANCIA FLAMINIA PF 3B 2.8 Liter COUPE model. Includes the 2 small upper trim sections. They are as pictured. They have wear from use and age.
LANCIA FLAMINIA PF 3B COUPE Used Original Complete Set WEATHERSTRIP RETAINERS
This is a used Original SET of Side Window WEATHERSTRIP RETAINER MOLDINGS from a LANCIA FLAMINIA PF 3B 2.8 Liter COUPE model. Includes 3 trim sections for each side of the car, driver's and passenger.
LANCIA FLAMINIA PF 3B COUPE Used Original PAIR of ROOF DRIP MOLDINGS
This is a used Original PAIR of ROOF DRIP MOLDINGS from a LANCIA FLAMINIA PF 3B 2.8 Liter COUPE model. They are as pictured. Last photo, shows side of car as a reference for their mounting location.
Lancia Aurelia B20 B20S Rear Window Trim
Lancia Aurelia B20 B20S rear window trim. Used and in good condition.
LANCIA FLAMINIA PF 3B COUPE Used Original PAIR of INTERIOR ROOF TRIM MOLDINGS
This is a used Original PAIR of INTERIOR ROOF TRIM MOLDINGS from a LANCIA FLAMINIA PF 3B 2.8 Liter COUPE model. They are as pictured. They will need to be reupholstered.
1982 Lancia Beta Zagato - Side Vent Grille Set
PostingThis is a left and right side vent grille for any 79-82 Lancia Zagato. It fits on the side of the car on the targa bar, just behind the door.This part is specific to the 1979 to 1982 Lancia Zagato and will not fit any other vehicles.Condition- not sun faded, good condition.
1982 Lancia Beta Zagato- Convertible Back Seat Surround Board- Euc
Posting 1982 Lancia beta zagato Convertible back seat bonnet- surround board.Covers rear seat area- back and top near the convertible top. Condition- other than where rust made contact, it’s a great restore item or replacement to your worn out piece .Shipping- due to the nature of its size and material, shipping will be determined. I can ship fastenal , and possibly fedex- but the costs are going to be anywhere from $70-130 to ship this to the USA.