Used AMC Manual Transmissions and Related Parts For Sale

Jeep Wagoneer J10 80-86 AMC 20 Axle Housing Modified

Full width AMC 20 rear axle from a 1981 Jeep J-10. It is in good condition. The tubes have been welded to the housing and the rosette welds have been reinforced. It’s a good axle for a builder or off-road project.

1967-1971 AUTOMATIC AMC Aluminum Bell Housing OEM AMX Javelin 3180008

Lakewood Bell Housing #15411 60's-70's AMC V-8 Used/Recycled Scatter Shield

Jeep CJ Bell housing manual transmission T4 T5 SR4 CJ5 CJ7 4.2 258 304 AMC

AMC BELLHOUSING 3178899 1967-1971

AMC Jeep J10 84-87 Front Drive Shaft Dana 44 CV Joint NP229

AMC Jeep CJ5 Dana 20 single lever transfer case shifter assembly

AMC Jeep V8 Flywheel Flex plate bolts automatic AMX Javelin CJ wagoneer J10 6cyl

74-79 AMC Jeep Wagoneer J10 J20 CJ5 CJ7 Th400 Forward Drum Input Shaft Factory

AMC 20 NT 2.73 Complete Axle Housing SJ (63-91)

AMC MODEL 20 RING & PINION 2.73 RATIO with BEARING & CUP - OEM GOOD USED

AMC Jeep Javelin 401 Flexplate V8 Flex Plate Automatic Transmission OEM

80-87? Jeep J10 J20 AMC 258 4.2 Engine Wire Harness With Emissions and Computer

AMC 20 12 Bolt Jeep CJ Rear 4.56 Ratio 1971 - 1986 J10 Jeep Truck

Used set of 4.56 gears for a AMC 20 rear axle. These are in good condition with minor surface imperfections.

Transmission Assy. AMC ALLIANCE 84 85 86 87

Jeep Grand Wagoneer J10 J20 FSJ 80-91 AMC V8 Automatic Spacer Plate Dust Shield

This spacer plate will fit 1980 - 1991 Full Size Jeep vehicles with the AMC V8 engine and 727 automatic transmission.

Jeep Wagoneer J10 80-91 AMC V8 727 Automatic Shifter Shift Linkage Assembly

Jeep AMC Bellhousing Inspection Cover Plate

8133886 AMC 20 (CJ 82-86) Axle Shaft Right

8133886 AMC 20 (CJ 82-86) Axle Shaft Right Used OEM RIGHT Rear Axle Shaft for AMC 20 Rear axle with Tapered Shafts. Should fit Jeep CJ7 CJ8 (1982-1986). 31.5625" (31 9/16") in length (Over All Length).

POWDER COATED 1973-1978 304 360 401 V8 Jeep AMC Crank Pulley 2-GROOVE 3216613

POWDER COSTED 1973-1978 304 360 401 V8 Jeep AMC Crank Pulley 2-GROOVE oem amx. This item is sold as is with no warranty or returns. Please ask questions and verify this item will fit your application before purchasing.This sale includes 1 refinished AMC 2 groove crankshaft pulley. P/N 3216630. This part has been steam cleaned and degreased, then onto our gassing oven, media blasted and powder coated in “matte black”. It’s in excellent condition and would be great for your project. dimensions of the bolt pattern are in the pictures. 3.645” straight across the long way and 2.625” ft bolt to bolt on the short sidePlease ask questions if you have any, thank you for your interest. Send message to make an offer