Used Triumph Crankshafts and Parts For Sale

PartRequest.com is your online source for quality used Triumph crankshafts and parts.

The crankshafts and parts listed below fit a Triumph.

Powered By Powered By

Real Nice Used Stanpart/Triumph#311313 Engine Crank-Shaft Assembly TR6 STD-Size

The Part Number ref# is believed to be 311313 and W2152.

Original 1970-1977 Triumph Stag V8 3.0L Engine Crankshaft 311654R SOHC

OEM Original. This crankshaft hasn't been tested for cracks or bends. We Buy Classic Cars! (ID: 34336).

2004 VICTORY V92TC TOURING ENGINE MOTOR CRANK CRANKSHAFT

ENGINE CRANKSHAFT.IN GOOD SHAPE. SOLD AS SHOWN IN PICTURES. OFFICE USE SHELF.

Triumph TR250 69 TR6 - Crankshaft STD/STD

Off a 1969 TR6 but fits the later 250 engine as well. Double row timing gears and the pilot bushing fits in the back. Good shape, standard mains and rods.

OE Used Crankshaft STD/STD Triumph GT6 Triumph 2000 Mk2 2000 TC (2 liter 6 cyl)

You are purchasing an original used crankshaft from a KD1135x-E Triumph GT6 engine. It fits all GT6 engines except early Mk1. Also fits Triumph 2000 Mk2 and 2000TC. As removed condition (oily). Bearings removed were OE Vandervell STD size rods.

Triumph TR4. TR3 Crankshaft, Std Rods & Main Journals, Polished to 400 Grit,

Keys are firm in the keyways. No wear to the rear reverse thread slinger. Crankshaft is in outstanding condition.

TRIUMPH TR6 1973-1976 Original Factory Chrome Gas Cap

Number is shown on the pictures.D7/36983/6 26046 everything in picture is included. These Original Car parts are very hard to find.

Rear Crank Crankshaft Oil Seal Assembly Triumph TR2 TR3 TR4 TR4A Original OEM

Used original crankshaft oil seal assembly for Triumph TR2-TR4A. All photos are of the actual part you will receive.

Engine Crankshaft Fan Pulley Hub # 107250 OEM TRIUMPH TR2 TR3 TR3A TR4 TR4A USED

You are buying a good used front crankshaft pulley hub for TR3 & TR4 as pictured. Stanpart # 107250.

Triumph TR6 Crankshaft Extension & Bolt 3 5/16, Original, !!

Triumph Spitfire MKIV • Original 1300 Crankshaft. Used & Uncut. T3925

TRIUMPH SPITFIRE MKIV. ORIGINAL 1300 CRANKSHAFT. USED & UNCUT. CRANKSHAFT READS: "STANPART". " Katz Klassics Inc";. what you see is exactly what you get! MOST IMPORTANT!

Original TRIUMPH TR2 TR3 TR4 TR4A Crankshaft Gear Sprocket Stanpart # 55971 USED

You are buying a very good used TR3, TR4 crankshaft gear or sprocket as pictured. The teeth are very square and not sharp and worn like many for sale.

Triumph Spitfire MK3 • Original 1300 Engine Camshaft, Used. T4518

TRIUMPH SPITFIRE MK3. ORIGINAL 1300 (1296cc) ENGINE CAMSHAFT. " Katz Klassics Inc";. 32 x 12 x 12 & 75 lbs. MOST IMPORTANT!

Reconditioned and Reground .010 /.010 Engine Crankshaft 308129 for Triumph TR7 !

This OEM crankshaft is casting number 308129. This crankshaft has been magnafluxed and checked for cracks and run-out.

MG Triumph Original Crankshaft Nut Assembly

This is the front crankshaft nut that holds the main pulley to the crankshaft. This is an original unit that is used and in good working order. This unit needs a good cleaning but is otherwise in good shape.

Triumph TRW Crankshaft 70-2298 Left Hand Side

See pictures for details and condition. 

Rear Crank Crankshaft Oil Seal Assembly Triumph TR2 TR3 TR4 TR4A Original OEM

Used original crankshaft oil seal assembly for Triumph TR2-TR4A. All photos are of the actual part you will receive.

Triumph TR3 Crankshaft Pulley, Bolt, Slinger & Fan Hub Extension, 3.25" Original

Listed for a Triumph TR3, is an original crankshaft pulley, bolt, slinger, and fan hub extension. Pulley is still the correct contour. Over seventy five hundred sales at a 99% approval rate, of manufactured and used British Car Parts.

Triumph TR6,, TR250, GT6, Spitfire, Midget 1500, Crankshaft Rear Seal Bracket, !

Listed for a Triumph TR6, TR250, GT6, Spitfire 1500, MK IV, Spitfire, MG Midget 1500, or TR7 is an original crankshaft rear seal aluminum mounting plate.

1980 Triumph TR7 Crankshaft

I have for sale a 1980 Triumph TR7 Crankshaft. This is fair shape for its age. This is standard on rod and mains. This does have some scratches from normal use. This did not have any spun bearings. Snout appears to have some wear. Please look at the pictures. This is used and sold AS IS. Please email with any questions and please check out my other listings. Shipping will be $60