Used Studebaker Auto Transmissions For Sale
PartRequest.com is your online source for quality used Studebaker auto transmissions.
The auto transmissions listed below fit a Studebaker.
1955 STUDEBAKER MANUAL TRANSMISSION W/OD 876968
(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
CORE 3-SPEED NON-OVERDRIVE FITS 1951 PACKARD 1019221
USED, 3SPD NON-OVERDRIVE WITH CUSTOM SHIFTER ASSEMBLY, CASE # 433192 TAIL SHAFT # 426051. FITS 2401-02-13, 2501-02-13-31, 2601-02-11-13-26-31-33, 5400-01-02-11-13-26-33. CORE 3SPD,433192, NOTES. ANYTHING LISTED AS A CORE WILL NOT HAVE A FULL WARRANTY.
1955 STUDEBAKER TRANSMISSION 878147
(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
1955 PACKARD CLIPPER CORE AUTOMATIC TRANSMISSION 8-320 817280
CORE,320,AT,FOR REBUILD,CORE. (i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
1948 STUDEBAKER TRUCK MANUAL TRANSMISSION 4X2 DRW 961789
6-CYL,MT,4X2,DRW,TRUCK NOT CAR. (i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
1952 PACKARD CORE AUTOMATIC TRANSMISSION INLINE 8 CYLINDER 816993
(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
CORE AUTOMATIC TRANSMISSION FITS 1955 PACKARD 1029026
(i.e. Transmissions, when installing a transmission the torque converter needs to be seated properly on the input shaft. If it is not seated properly and it is bolted to the engine, will result in a broken fluid pump.).
1951 PACKARD BELL HOUSING INLINE 8 CYLINDER AT 685004
Pick up at our facilities is available. However the sensors and the torque converter are not covered under the warranty. Part Detail. Axles Assemblies: Axle assemblies will not include any brake hardware: Calipers/Rotors/Shoes/Pads/Hoses/Brake Lines.
Core 4.7L 8 Cylinder Automatic Transmission for 1952 Packard 200
4.7L AUTOMATIC TRANSMISSION 04202022. You must follow manufacturer’s guidelines for replacing your transmission. TRANSMISSION WARRANTY Used Late Model, Used Classic, New and Rebuilt. The warranty is void if any part(s) is used for any purpose not intended by the manufacturer.