L QUARTER PANEL DISCOVERY FITS 94-95 LAND ROVER 13748 Description--> Description This panel is in the rear of the vehicle. We do not guarantee a color match. If the item needs to be cut to be removed the customer will verify where the cut needs to take place. We may be able to ship this item please contact us for an exact rate. This item is used and will appear as such. Surface rust, small dings, and paint chips are common. This item does not include rear door molding pieces, rocker panels, etc. Donor Vehicle VIN: SALJY124XSA116363 Model: DISCOVERY Year: 1995 Mileage: 172000 (0 = not available or unknown) Stock Number: 080505 Store Number: 1 Part Detail Part Grade: Part Category: Y Part Placement: Quarter Panel Assembly Notes: 4DR,WHITE,9-94 This panel is in the rear of the vehicle. We do not guarantee a color match. If the item needs to be cut to be removed the customer will verify where the cut needs to take place. We may be able to ship this item please contact us for an exact rate. This item is used and will appear as such. Surface rust, small dings, and paint chips are common. This item does not include rear door molding pieces, rocker panels, etc. This part will fit these makes and models with these options LAND ROVER 94-95 Discovery --> WARRANTY / GUARANTEE --> Fitment should be verified prior to purchase. Specific item information and warranty information is posted on the listing. If you have any questions regarding the guarantee please contact us prior to purchase. The 60 day period starts from the date on the invoice unless specific terms have been negotiated due to special circumstances. No labor warranty is provided, no exceptions. Pre-installation maintenance items such as seals, fluids, gaskets and clean up products will not be reimbursed. A refund/exchange will not be given until the item is returned first, no exceptions. In the event a part sold with a warranty, fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part if available or refund the part purchase price. No refund on deposits, unwanted, special order parts, or special "cut" items. No refund will be issued on an incorrectly ordered item unless the item is returned in the exact same condition it was received. A restocking fee may apply. If you have any question on the warranty of your part, please ask prior to purchase. Please note most items are used parts and will visually appear as such. If an RMA# is not provided there may be a delay in processing the return. Original shipping charges and return shipping charges are not refunded and are the buyer's responsibility. The seller may cover return cost in special situations but that is at the sole discretion of the seller. If an item is unwanted, ordered incorrectly, or not needed a 20% re-stocking fee may be assessed solely at our option. The return process works as follows: obtain an RMA number, ship the item back to Gauger & Son Salvage, Inc., 7692 Helena Road (PO Box 144), Arena, WI 53503. Include the RMA number, and a short note explaining the return. LTL Shipments: Most powertrain items and body panels are shipped via LTL Carriers to ensure the item arrives safely and as they are often too expensive to ship with a standard ground carrier. In the event an LTL item is not accepted, refused, is not allowed to be delievered the buyer will be charged return freight. --> SHIPPING NOTES ABOUT US HELP Our default shipping rates are for the continential 48 US states only via Fed-Ex (Primary Shipper), UPS , USPS, Spee-Dee, R&L Carriers and similar LTL providers. An extra charge is required for Alaska, Hawaii, and APO, Puerto Rico & Other US Territories. No international LTL shipments will be made. Standard handling time is 1-3 business days (Monday-Friday) not including the day of purchase and/or payment whichever occurs later for both freight and non-freight items. This does vary party type to party type please check the individual listing for details. That means if an item is purchased on the 1st but not paid for until the 3rd the handling time count will not begin until the 4th. Standard shipping time on non-freight items is 1-5 days depending on location, and if a delivery appointment needs to be scheduled or not. Feel free to contact us for an accurate time frame on any certain part or if you are in a time crunch and want to see if we can help as shipping and handling charges vary per part type. Unless otherwise noted, Buyer pays shipping. Even if an item is shipped via Free shipping the buyer still may be responsible for return freight. Feel free to ask for an exact shipping charge prior to purchase. Freight Items We will not ship freight items and some larger or fragile parts outside of the 48 US states. For large items that must be shipped via Freight Truck (i.e. engines, transmissions, rear axles, large sheet metal items, bumpers, fenders, rear seats, large front seats), a business delivery address is required for the stated shipping price and a telephone number is required. Additional residential charges and liftgate fees may apply. Those chareges would be billed via PayPal. The item however would not be shipped until the additional charges are paid. We can also arrange for you to pick up your freight item at your local freight terminal. For an accurate residential freight quote, please contact us before your purchase be sure to include the destination zip code. If for some reason our shipping cost is greatly over this estimate, we reserve the right to ask for additional funds or an alternate ship to address. If an LTL item arrives damaged and is singed for/accepted it now belongs to the buyer and it will be their responsiblity to return the item. If the item is refused due to the damage the seller can easily work with the carrier and get the buyer refunded. In the event an LTL item is not accepted, refused, is not allowed to be delievered the buyer will be charged return freight and a re-stocking fee. Please contact us if you have a business address as shipping may be less expensive. Shipping Deadlines We will process every order in the order its received, an order is not received until it is paid for in full unless other arrangements have been made. Our business hours are from 8:00am-5:00pm M-F. Business days are Monday-Friday and does NOT include Saturday. Orders placed after 10:00 am CST cannot be guaranteed shipping that day (if that option applies to your listing). Handling time is typically between 1-3 days not including the day of purchase or payment whichever occurs later. All Non-Freight items will typically be sent via Fed-Ex, USPS,Spee-Dee at our option. If you need 2nd day air or Next day air service please call us directly for best results. You may also add this service during checkout but we can only guarantee shipment of these orders if it is placed before 10:00 am CST. Standard shipping time on small ground packages will range from 1-5 business days and will mainly depend on how close the buyer is to Wisconsin. For freight items Standard handling time is 1-3 business days (Monday-Friday) not including the day of purchase and/or payment whichever occurs later that is to allow time for pulling the unit if need be, testing, cleaning and preparing the item for shipping. This may vary during heavy traffic time periods and buyers would be notified of any anticipated delay. Standard shipping time on LTL item is 1-5 days depending on location of the recipient in relation to Wisconsin, if a delivery appointment needs to be scheduled or not, if the buyer is located in a limited access delivery area or not, if a correct address is provided or not and if a telephone number is provided or not. This is also providing that we have adequate payment, including additional funds required to process the shipment. If you have any questions about the exact time your item will ship please contact us. The most common question I receive is how do we determine if the item can be shipped via standard ground or has to go freight truck. Weights and dimensions vary so much within that part type that one item may be ok to go via Fed-Ex but another may have to go via freight truck. For example a front bumper for a Geo Metro will be much different than a front bumper for a F250. Standard freight rules state anything measuring over 165" using the formula (Height X 2 + Width X 2 + Length) will not be accepted. It will be too large and we will have to ship the item via freight truck. As well anything over 150 lbs will not be accepted via standard ground and would need to be shipped via freight truck. Oversize charges are implemented for items over using the same formula and if it's over 130" a $55.00 "Oversize" charge is applied. As well charges are based on dimensional weight not actual weight. Using the formula (Length X Width X Heigth) if the item is greater than 5184" it would be divided by 166 to get the weight that will be charges for the shipment. Address corrections, delivery intercept, etc are all additional charges. That said we do our best to negotiate the best rates possible and pass that savings on to you. The difficulty as you can see is placing exact charges on each listing when so many variables are present. If the listing states you need to contact us for exact charges please do so. Fitment and compatibility: Factory interchange is always listed if available for the specific part. If an interchange is not available one will not show and in that case we recommend and exact year/model fit or verification with VIN# and dealership research. Please be sure to verify fitment prior to purchase or contact us for verification. Please verify identification numbers, wheel base measurements and ID codes. If you have a question about a part please contact us before purchasing. We prefer it, it's faster and it provides a written record for your protection and ours. You will receive a response the fastest using that method as it's checked first. We try to answer all messages within 24 hours but please note during extremely high volume times your request will be taken care of in the order received and that may take up to 48 hours. Thank you! If we are unable to answer your questions before the listing ends, and the item does not sell, the item will be re-listed again soon for you to purchase. If you are in need of a pictures or additional information simply ask and we'll contact you when the information is available. Fitment & Compatibility: Please verify prior to purchase using the information provided on the listing or contact us. We prefer it, it's faster and it provides a written record for your protection and ours. You will receive a response the fastest using that method as it's checked first. We try to answer all messages within 24 hours but please note during extremely high volume times your request will be taken care of in the order received and that may take up to 48 hours. Pictures: If a picture is not yet provided please just ask and one will be provided for you as soon as possible. A STOCK IMAGE OR GENERIC VEHICLE IMAGE(S) may be provided to show an example of the item being sold or the donor vehicle the particular part came from mainly for identification purposes. They are not reflective of the actual part or condition being sold. Item specifics, part grade, conditions and options should be used to determine condition. Some parts due to location are very difficult to get pictures of if they remain on the donor vehicle such as; window regulators, flywheels, fuel pumps, and suspension parts. We will do our best to do so, however other means of verifying it's the correct part such as VIN# comparison may be more feasible for both parties. Core Charge. Core is an acronym for ‘Cash On Return’. A core charge is sometimes applied to rebuildable parts such as engines or alternators that can be redeemed for a portion of their original price. If the part you are purchasing has a core charge applied, it will be noted in the description. Parts Grading. A standard code system is used to communicate the condition and quality of a part between automotive recyclers, automotive repair shops, and insurers. Knowing how these codes are used will help you understand whether the part meets your expectations before you buy it and what you can expect from the part when you receive it. A Grade The highest quality part. It is of low miles and/or exceptional condition for its age. A condition does not mean new or perfect it means the item is in great used condition. Visual flaws still may be present as the item is used. Condition grades are given by the seller in accordance to industry standards. This parts grade is subjective and is either directly given to a part by the seller or assigned automatically. If you are concerned please ask prior to purchase and we'll compare what you are expecting to the actual condition of the part. B Grade - The second level quality part. It is of average miles and normal condition for its age. Comon used part visual blemishes most lilkely are present. C Grade - The third level quality part. It has high miles and/or light damage. No Grade - A part that has not yet been graded. This system was designed as a bench mark with certain understandings. The item is used, and most likely will NOT be perfect even if listed in grade A. For example a part can still be grade A with normal blemishes such as surface rust, scratches, etc. This is still a subjective system and the parts grading system is standard with recyclers, body shops, and insurance companies, not consumers. Consumers often expect Grade A to be new, nearly new, very clean or pretty. That is not the way this system was designed. Some items are also assigned an automatic parts grade based on mileage such as fuel pumps, oil pans, engines, transmissions, powertrain and suspension parts. Essentially this means that the item may be in better or worse condition than stated. For that reason we request again if you have any questions you ask prior to purchase. We update condition grades as our inventory is updated, we also check the condition on the listing prior to shiping and will contact you if any major discrepancy is noted. We ask that you verify the actual condition versus what you are expecting to prevent any issues later. We are confident with pictures, interchange, and part detail information that we allow our buyers to be fully informed about the item listed and can purchase with confidence as long as the buyer reads the entire listing and fully understands the item is used. Body parts such as fenders, front bumpers, hoods, quarter panels and doors may have 3 digit damage codes such as 2D1, 6K1, etc. Please ask what that code means prior to purchase as they are standard recycler codes and the average consumer may not be familiar with this system.