Fuel Injector fits 1999-2003 International 4800,4900 2554,2654,3000 4300LP,4400L

Standard Part No: FJ1307

Manufacturer: Standard

Part Number: FJ1307

Fitment Type: Performance/Custom

Color: Yellow

Fuel Type: Diesel

Thank you. Undergoes rigorous, multi-step cleaning process before reassembly to remove all oil and debris. Critical tolerances of components measured, visually inspected, and, if applicable, electrical tested, and either replaced or reconditioned as needed. Many components are replaced 100% including O-rings, springs, etc. Undergoes performance testing against OEM, including pop-off pressure verification. Laser-etched part number and date code ensures accuracy and traceability. Packaged in VCI bag to retain rust inhibitor and eliminate the opportunity for contamination.

Marketing Description

Remanufactured at our TS16949, ISO9001, and ISO14001 certified facility, where we inspect, tear down and validate, clean, reassemble, and test each part to ensure quality. Undergoes rigorous, multi-step cleaning process before reassembly to remove all oil and debris. Critical tolerances of components measured, visually inspected, and, if applicable, electrical tested, and either replaced or reconditioned as needed. Many components are replaced 100% including O-rings, springs, etc. Undergoes performance testing against OEM, including pop-off pressure verification. Laser-etched part number and date code ensures accuracy and traceability. Packaged in VCI bag to retain rust inhibitor and eliminate the opportunity for contamination.

UPC

033086205243

Fitment Type

Performance/Custom

Engine ID Code

LMM

Fuel Injection Type

Diesel

Fuel Injector Type

Direct Injection

Fuel Type

Diesel

N/A

Engine Code N/A

New or Reman

Remanufactured

Notes

Zinc Coated to Prevent Corrosion

O-Rings Included

Yes

O.E.M. Replacement

Yes

System Type

Direct

Terminal Gender

Male

Terminal Quantity

2

Terminal Type

Blade

See Item Specifics section for additional specifications about this part. This may be an OEM Product. OEM designates a replacement part made by the manufacturer of the original partinstalled on the vehicle when it was first produced. Most cars are originally assembled with parts made by companies other than the one whose emblem appears on the vehicle. For example, BMW does not manufacture parts, they assemble parts from many parts manufacturers into a finished vehicle. You are purchasing a Fuel Injector made by STANDARD MOTOR PRODUCTS. We sell this item in increments of 1, which may be less than you need for your application. Also review the notes section in the compatibility chart for additional specifications about this part.

This part generally fits IC Corporation,International Harvester vehicles and includes models such as 2554,2574,2654,2674,3000 IC,3 000,3000FE,3000IC,3200,3600,3800,4300,4300LP,4400,4400LP,4700,4700LP,4800,4900,5500i,5600i,7300,7400,7500,8100,8500,CE Commercial, CE School Bus,FE Commercial,FE School Bus,Genesis RE,RE Commercial,RE School Bus with the trims of Base Bus (Non School) - Cab For ward,Base Bus (School) - Cab Forward,Base Gliders - Long Conventional,Base Straight Truck - Long Conventional,Base Straight Truck - Medium Conventional,Base Straight Truck - Short Conventional,Base Tractor Truck - Long Conventional,Base Tractor Truck - Low Til t,Base Tractor Truck - Medium Conventional,Base Tractor Truck - Short Conventional,Base. The engine types may include 7.6L 466Cu.
In. l6 DIESEL Turbocharged,7.6L 466Cu. In. l6 DIESEL. This part fits vehicles made in the following years 1999,2000,2001,2002,2003 .

To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part. THE SELLER**

We are NOT a big box! No, we are an actual auto parts store with a massive inventory. We have been selling automotive parts and supplies to do it yourselfers and professional installers for over thirty years. We offer old fashioned service with today's technology. Cores must be complete, rebuildable, fit the same vehicle application and be returned in the box the remanufactured part came in. This means the part you send back needs to have whatever components (like pulleys) came on the remanufactured part. The box helps identify the part and proves to the manufacturer that the core replaces one of their products. Obviously, the core won't be working well (or you wouldn't have replaced it) but it can't be smashed, rusted solid, or otherwise unusable. (We rarely reject a core. If the part came off a running vehicle and just wore out--no problem. But please don't send a part that's been soaking in junkyard mud for 5 years and expect to receive core credit!) Shipping charges on cores aren't refundable. (Before sending back a core, you'll need to decide if the core deposit is worth the shipping cost.) As with any return, before returning a core you must obtain and follow return instructions from us. Please note: All fluids must be drained from the core The core must be securely wrapped in plastic and sealed Cores must be returned in the packaging used in the shipment of the order sent to you Your core will be inspected to determine if the core is rebuild-able Core return shipping charges are the responsibility of the customer. These are not refundable.