Blower Motor Front Fits 95-01 BMW 740i

Item #:
PR-303678965438
Ships From:
Amite, Louisiana, US
Powered by
Price:
$44.99

Our site may earn a commission when you click on links to various merchants and make a purchase.

This is a used genuine OEM part with VIN number WBAGK2325SDH66481.

Year: 1995

Model: 750il

Part Number: 615-58348

VIN: WBAGK2325SDH66481

Interchange Part Number: 615-58348

Genuine OEM Part: Yes

Description

Blower motor assembly.

Donor Vehicle

VIN:

WBAGK2325SDH66481

Model:

750IL

Year:

1995

Mileage:

0 (0 = not available or unknown)

Stock Number:

207778

Store Number:

1

Part Detail

Part Grade:

A

Part Category:

Y

Part Placement:

Notes:

Fast and free shipping. The 90 day period starts when you take possession of the part. No labor warranty is provided. If the item was not as described in the listing we will replace it free of charge or refund your full purchase price. If you ordered the wrong part then original shipping charges and return shipping charges are not refunded.

In the event a part sold with a warranty fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option.

Original shipping charges and return shipping charges are not refunded.

LIMITED PARTS WARRANTY:

This warranty does not include coverage of sensors, gaskets, electrical components, wiring, brackets, belts, pumps, filters, hoses, seals or fuel related parts or emission related valves or manifolds.

This warranty is a parts exchange warranty. If we do not have the part in stock to replace the defective part A&B MOTORS reserves the right to choose between: (a) repairing the defective part, (b) locating a replacement part, or (c) providing a refund or the original purchase price.

This warranty does not include coverage for the cost of any labor or any other expense incurred by the purchaser

These costs include, but are not limited to towing charges, loss of time, lost use of vehicle, inconvenience, lodging, oil, filters, anti-freeze, telephone charges, car or truck rental, gaskets, or seals.

CONDITIONS THAT VOID WARRANTY:

Installation is not done by a certified mechanic.

Installation of part(s) in any non-stock application (off-road racing, conversion, fleet or commercial application, etc.

Dismantling of part(s) for any reason.

Improper installation or handling.

Warranty only applies to the purchaser shown on this invoice.

STANDARD LIMITED WARRANTY:

Warrantor whose name and address appears above warrants all parts for warranty period on invoice from date of purchase. In event of defect, promptly notify warrantor.

Important: The obligations of the warrantor are limited to replacement only as provided herein. Implied warranties of merchantability or fitness for a particular use are limited to the same duration as the limited written warranty provided herein. Warrantor shall not be liable for any incidental or consequential damages included but not limited to installation, removal or use of this merchandise.

MECHANICAL PARTS - OTHER CONDITIONS:

1. Flush Drain and replace fluids to systems manufacturers suggested fluids types and levels.

2. Install new seals, gaskets, filters, bolts, plugs, sensors, boxes, thermostats, belts, hoses, lines, cables, coolers, wires, emission valves or any other type of required part not covered under warranty and/or OEM specifications

3. Properly align / tighten all parts to manufactures suggested specifications.

4. Flush cooling system and refill to appropriate level.

Note: when interchanging between years and models it may be necessary to change wiring, linkage, speedometer gears or sensors. If manufacturer's procedures are not done, the warranty will be void. Please call us if you have any questions.

ENGINE WARRANTY:

1. All engines are stamped and have a heat tab installed which has a center that will melt if the temperature exceeds 255 to 260 Fahrenheit. If this heat tab is melted the warranty is void. If your original part failed because overheating, we strongly recommend that you remedy what caused it to fail, so that future parts will not be ruined. Also it is required that these items are followed to manufacturer requirements and specifications to protect the warranty of the purchased parts.

2. Used engines are guaranteed not to have cracked block, head or bad crankshaft. Parts external to the cylinder block and the cylinder head(s) (i.e., carburetor distributor, fuel pump, etc.) are not warranted. These are left on the engine for the installer's convenience ONLY.

3. All conditions listed under terms of sale (above) apply.

4. Used engines guaranteed against rod knock, excessive smoking, and excessive oil consumption.

5. It is recommended the buyer replace the rear main seal and inspect gaskets prior to installation.

6. All Parts on the engine at time of sale must be returned with the core engine for core credit.

TRANSMISSION WARRANTY:

1. Transmissions must be installed to current OEM specifications for a new transmission install. Transmissions must be installed by a certified mechanic. Failure to flush and flow test the system on your vehicle will void your warranty.

2. Improper detent adjustment, low fluid level, on Automatic Transmissions - Failure to install new filter(s), broken front pump, or improper installation voids all warranties.

3. All conditions listed under terms of sale (above) apply.

4. It is recommended buyer replace front seal prior to installation.

In the event a part sold with a warranty fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option.

SHIPPING NOTESABOUT USHELP

A&B MOTORS ships to US addresses within the 48 states via UPS ground OR USPS.

ENGINES AND TRANSMISSIONS WILL BE SHIPPED TO A COMMERCIAL ADDRESS ONLY AND REQUIRE A PHONE NUMBER FOR SHIPMENT.

THE COMMERCIAL ADDRESS MUST HAVE A FORK LIFT FOR UNLOADING.

ENGINES AND TRANSMISSIONS CAN BE ARRANGED FOR FREIGHT TERMINAL PICK-UP.

Pick-up at our facilities is available. Please message us prior to your purchase to arrange pick-up.

Items will be shipped within 1-2 days of purchase.

Please allow up to 10 days for delivery. Most areas in the US are within 5 days.

If an item arrives damaged, please call or send us a message through paypal within 24 hrs for instructions.

Availability

If you cannot find a part that you need in the store, please contact us and we will let you know if we can get it and the price. Due to high demand, short supply or human error, occasionally we may be out of stock on an item. If this happens, we will contact you immediately and offer you the option of waiting for the part to come in stock, or a full refund.

If you have a question about a part please contact us before purchasing.  We try to answer all messages within 24 hours, Monday - Friday 8-5 Central Standard Time . If we are unable to answer your questions before the listing ends the item will be re-listed again soon for you to purchase.

Parts Grading. A standard code system is used to communicate the condition and quality of a part between automotive recyclers, automotive repair shops, and insurers. Knowing how these codes are used will help you understand whether the part meets your expectations before you buy it and what you can expect from the part when you receive it.

A Grade- The highest quality part. It is of low miles and/or exceptional condition for its age.B Grade- The second level quality part. It is of average miles and normal condition for its age.C Grade- The third level quality part. It has high miles and/or light damage.No Grade- A part that has not yet been graded.

Returns Accepted: Yes

Item must be returned within: 30 calendar days

Return shipping will be paid by: BUYER