AUTOMATIC TRANSMISSION FITS 98-99 CONCORDE

Item #:
PR-254769805848
Ships From:
Negaunee, Michigan, US
Powered by
Price:
$175.00

Our site may earn a commission when you click on links to various merchants and make a purchase.

Dodge Part No: 400-04016

This is a used genuine OEM part from a 2002 Dodge Intrepid with VIN number 2B3HD46R22H267919.

Interchange Part Number: 400-04016

Genuine OEM Part: Yes

Mileage: 135000

Description

Hollander Interchange Notes: CH 2.7L $1910 CH 3.2L, 3.5L $2260 Ident: 4659800 Ident: 4659900 Ident: 5003885 Ident: 5003886 OEM recommends a dealer programming the quick learn procedure with a DRB scan tool after replacement.
Compare wiring connectors, round pins verses flat blades.
Final drive ratios differ between 2.7L & 3.2/3.5L. Also see 400-4467A for possible additional interchange.

Donor Vehicle

Model:

INTREPID

Year:

2002

Mileage:

135000 (0 = not available or unknown)

Stock Number:

B06121

Store Number:

1

Part Detail

Part Grade:

A

Part Category:

U

Part Placement:

Notes:

This part will fit these makes and models with these options

CONCORDE 99 AT; 2.7L, ID 5659900

INTREPID 98 AT

CONCORDE 98 AT

INTREPID 99 AT; 2.7L, ID 5659900

WARRANTY / GUARANTEE

All transmissions sold by Superior Auto Parts & Repair are covered by a 30 day replacement warranty .   All transmissions are tested to the best of our ability and are guaranteed to perform smoothly without excessive noise or vibration.   All fluids are drained and filters removed from the transmission before being sold.   Transmissions must be installed by a properly trained automotive technician.   New filters, pan gaskets, input and output shaft seals and refilling with proper fluids are the responsibility of the installer.   All transmission lines MUST be flushed properly and all coolers MUST be replaced with new parts and if required, reprogram the vehicle's computer to ensure proper operation of the transmission.

All engines sold by Superior Auto Parts & Repair are covered by 30 day replacement warranty (unless otherwise stated).   All engines are tested to the best of our ability including oil pressure and compression readings.   All engines perform smoothly without excessive engine noise or excessive oil consumption (unless otherwise noted).   Heat tabs are applied to all engines and will melt if engine temperature exceeds 260 degrees. Any engine damaged by overheating or inadequate lubrication will not be covered by this warranty.   Only the main engine components included within the long block are covered under this warranty.   Carburetors, fuel injectors, water pumps, hoses, gaskets, ignition components, etc... will not be covered by this warranty.   All engines must be installed by a properly trained technician.   It is the responsibility of the installer to properly flush the oil cooler and lines, transfer needed parts, replace any seals or gaskets which may cause leakage, and replace all fluids and filters.   It is very important that the intake gaskets are replaced before installation of the engine or warranty will be voided.   Any engine warranty claim must be made within the warranty period while the engine is still in the vehicle.   Failure to comply with any of the above will void the warranty.

SHIPPING NOTES

ABOUT US

HELP

Core Charge. Core is an acronym for ‘Cash On Return’. A core charge is sometimes applied to rebuildable parts such as engines or alternators that can be redeemed for a portion of their original price. If the part you are purchasing has a core charge applied, it will be noted in the description.

Parts Grading. A standard code system is used to communicate the condition and quality of a part between automotive recyclers, automotive repair shops, and insurers. Knowing how these codes are used will help you understand whether the part meets your expectations before you buy it and what you can expect from the part when you receive it.

A Grade- The highest quality part. It is of low miles and/or exceptional condition for its age.B Grade- The second level quality part. It is of average miles and normal condition for its age.C Grade- The third level quality part. It has high miles and/or light damage.No Grade- A part that has not yet been graded.

Business hours Mon-Fri 8:30am - 5:00pm EST. We will respond within 24 hours.

Shipping Notes:

Help:

Core Charge. Core is an acronym for ‘Cash On Return’. A core charge is sometimes applied to rebuildable parts such as engines or alternators that can be redeemed for a portion of their original price. If the part you are purchasing has a core charge applied, it will be noted in the description.

Parts Grading. A standard code system is used to communicate the condition and quality of a part between automotive recyclers, automotive repair shops, and insurers. Knowing how these codes are used will help you understand whether the part meets your expectations before you buy it and what you can expect from the part when you receive it.

A Grade- The highest quality part. It is of low miles and/or exceptional condition for its age.B Grade- The second level quality part. It is of average miles and normal condition for its age.C Grade- The third level quality part. It has high miles and/or light damage.No Grade- A part that has not yet been graded.

About Us:

Business hours Mon-Fri 8:30am - 5:00pm EST. We will respond within 24 hours.