Used Suzuki Reno Ex Intake Manifolds

The primary function of the intake manifold is to evenly distribute the combustion mixture (air and fuel) to each intake port in the cylinder head. Proportionate distribution is important to optimize the efficiency and performance of the engine.

The intake manifold may also serve as a mount for the carburetor, throttle body, fuel injectors and other components of the engine.

Because of the downward movement of the pistons and the restriction caused by the throttle valve, a partial vacuum pressure exists in the intake manifold. This manifold vacuum can be used as a source of ancillary power to drive auxiliary systems such as ignition advance, power assisted brakes, cruise control, windshield wipers, power windows, ventilation system valves, etc.

This vacuum can also be used to draw any piston blow-by gases from the engine's crankcase. This is known as a closed crankcase ventilation or positive crankcase ventilation (PCV) system. This way the gases are burned with the fuel/air mixture.

Intake manifolds have historically been manufactured from cast aluminum or cast iron. However, composite plastic materials are gaining popularity and have been used in most newer Chrysler 4 cylinder engines, Ford's Zetec 2.0, Duratec 2.0 and 2.3 engines, and GM's Ecotec series engines.

Find a Used Suzuki Reno Ex Intake Manifold Now

Are you looking for used Suzuki Reno Ex Intake Manifolds? If so, PartRequest.com's parts locating service can help you find a quality used Suzuki Reno Ex Intake Manifold from reputable salvage yards located throughout the United States and Canada.

Get a great deal! Our used auto parts locator service will help you get a great deal on the used Suzuki Reno Ex Intake Manifold you need for your car, truck, SUV or van. Get multiple quotes from junk yards and auto wreckers who compete for your business.

Find it Fast! Our large network of salvage yards ensures that you'll be able to find your used Suzuki Reno Ex Intake Manifold quickly, all from the comfort and convenience of your home.

Find a Used Suzuki Reno Ex Intake Manifold Now!

View Recent Requests for Used Suzuki Parts

If you operate a junk yard or salvage yard and you are interested in selling quality used Suzuki parts, take a look at the following Used Suzuki Parts requests that have been placed through PartRequest.com.

	Vehicle	Part	Location	Date
	1997 Suzuki Sidekick Sport	Engine Mounts idler pulley bracket		10/7/2008
	1997 Suzuki Sidekick Sport	Idler Pulley idler pulley bracket		10/7/2008
	2006 Suzuki Forenza	Fender		10/7/2008
	2006 Suzuki Forenza	Fender Liner		10/7/2008
	2006 Suzuki Forenza	Strut		10/7/2008
	1995 Suzuki Sidekick JS	Engine (Complete)		10/7/2008
	2003 Suzuki Grand Vitara XL-7	Steering Knuckle drivers side		10/6/2008
	2000 Suzuki Grand Vitara	Front diff housing. I've broke Front diff housing. I've broken the mount on the front diff. The pumpkin works fine but I need to replace the cast housing which is part of the mount		10/6/2008
	2004 Suzuki Aerio	Spare Tire		10/6/2008
	1999 Suzuki Grand Vitara	Door Assembly front and rear driver door ( 2 doors)		10/6/2008
	1995 Suzuki Sidekick JX	Axle (Rear, Complete)		10/6/2008
	2004 Suzuki Forenza	Diagnostic Module egr valve		10/6/2008
	1989 Suzuki Sidekick	throttle body assembly for ear throttle body assembly for early 1989 suzuki sidekick jx with manual trans.		10/5/2008
	1986 Suzuki Samurai	Driveshaft Rear drive shaft		10/5/2008
	1986 Suzuki Samurai	Door Glass		10/4/2008
	1987 Suzuki Samurai	Cylinder Head		10/4/2008
	2004 Suzuki Verona	Oil Pan		10/3/2008
	2002 Suzuki Aerio SX	Control Arm (Lower, Front) right		10/2/2008
	2005 Suzuki Reno S	Heater Blower Motor		10/1/2008
	2002 Suzuki Grand Vitara XL-7	A/C Compressor		10/1/2008
	2002 Suzuki Grand Vitara XL-7	A/C Compressor		10/1/2008
	2002 Suzuki Grand Vitara XL-7			10/1/2008
	2004 Suzuki Aerio	Wheel		10/1/2008
	2003 Suzuki Vitara	Convertible Top Require rear side curtain- RH side (or both)		9/30/2008
	2002 Suzuki Grand Vitara XL-7	Axle (Front, Complete)		9/29/2008